0769-8539-0209 / +86-15158220988
Automotive Mold

Automotive Mold

Large drop of Automotive mold top and bottom; The mold manufacturing technology is complicated; The injection system is many and complicated; The mold cost is ver high.

Automotive Mold Types

Automotive Mold

 Automotive Molds Characteristics

1. The automotive mold size is very big, and the largest mold weight is nearly 40T;

2. The mold structure is complex;

3. There are many irregular curved surfaces on the parting surface.

USM Injection Mould
Would you like to discover more about our precision plastic injection molds?
  • The design requirements of slider wear plate
    Jan 03 2024
    1. The wear plate of slider requires hardening treatment, with a hardness of 45-48HRC;2. The friction surface of the wear plate is required to be 1.0mm higher than the slider surface (see picture-1);3...
  • The T slot of slider and guider designing tips
    Dec 19 2023
    1. The T slot of slot should be designed according to the picture 1, If there is a relatively high slider, the slider T slot is not high enough which will ...
  • Slider angle designing tips
    Dec 05 2023
    1. Normally, all the insertion slopes of the slider are not allowed to be less than 3° to prevent excessive self-locking force and scratched;2. The angle of the locking surface must be bigger than th...