0769-8539-0209 / +86-15158220988
En
UNIQUE SOLUTIONS MOLD LIMITED
UNIQUE SOLUTIONS MOLD LIMITED
Automotive Grille Mold

Automotive Grille Mold

Automotive grille generally divided into 3 types:

1. Engine air intake grille;

2. Bumper decorative grille;

3. Buffer grille.

However, the exterior grille generally refers to the engine intake grille and the bumper grille, because these two kinds of grilles are exterior parts, they have relatively high requirements for surface quality, especially the grid-like structure, which leads to complex material flow, the key points is how to control the weld marks the location. 


BUY INJECTION MOLD
Don't Hesitate to Contact Us Now.
Related Automotive Mold
  • Slider designing tips 2
    Nov 23 2023
    The molding parting surface of the slider molding should be made as a shut-off surface as possible, and the width of the shut-off part should be at least 8mm, and do not make a shut-off surface;When u...
  • 2022 Shenzhen Industrial Exhibition ITES ended successfully
    Aug 22 2022
    The 2022 ITES Shenzhen International Industrial Manufacturing Technology and Equipment Exhibition and the 23rd Shenzhen International Machinery Manufacturing Exhibition were grandly opened in Shenzhen...
  • Slider designing tips 1
    Aug 04 2022
    1. After the slider core pulls out, the length of staying in the guide pin slot should not be less than 2/3 of the total length of the slider, for special cases, the slider slot can be partially lengt...
  • Slider designing tips 2
    Nov 23 2023
    The molding parting surface of the slider molding should be made as a shut-off surface as possible, and the width of the shut-off part should be at least 8mm, and do not make a shut-off surface;When u...
  • 2022 Shenzhen Industrial Exhibition ITES ended successfully
    Aug 22 2022
    The 2022 ITES Shenzhen International Industrial Manufacturing Technology and Equipment Exhibition and the 23rd Shenzhen International Machinery Manufacturing Exhibition were grandly opened in Shenzhen...
  • Slider designing tips 1
    Aug 04 2022
    1. After the slider core pulls out, the length of staying in the guide pin slot should not be less than 2/3 of the total length of the slider, for special cases, the slider slot can be partially lengt...